How to install Bluetooth headset on shoei helmet

The following are the installation steps for Bluetooth headsets in motorcycle helmets:

Step 1: Remove the entire helmet lining, including the earmuffs and the top lining on both sides, so that the Bluetooth device can be installed later.

Step 2: Remove the sponge plug of the earphone reserved hole to prepare for the installation of the sponge earphone.

Step 3: Install the Velcro base of the sponge earphone to ensure that the base is fixed firmly for subsequent operations.

Step 4: Paste the sponge earphone on the Velcro, pay attention to the routing method of the earphone cable groove, and ensure that the line is neat and not messy.

Step 5: Install the Velcro base of the soft microphone to fix the soft microphone to ensure clear calls.

Step 6: Install the Bluetooth headset base. There are two ways to install the base: sticky and slot. The sticky form is stable and does not shake, but it increases the difficulty of removal when replacing Bluetooth later; the slot form is easy to remove and replace, but it is inconvenient to install and easy to loosen after long use.

Step 7: Fix the Bluetooth headset base on the left side of the helmet, with the bottom of the helmet lens movable component as the reference, to ensure that adjusting the Bluetooth during driving will not reduce the driving speed.

Step 8: Press the cable under the helmet lining and fasten the buckles of the lining to ensure that the cable is securely fixed and does not affect riding safety.